The Complete Guide To Makita Hp1631k: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Makita HP1631K Information

the information about the Makita HP1631K:

Introduction

The Makita HP1631K is a 710-watt electric percussion drill that is designed for a variety of drilling and driving tasks. It features a powerful motor that can handle tough materials, such as wood, metal, and masonry. The drill also has a 13mm chuck that can accommodate a wide range of bits.

Image of Makita HP1631K electric percussion drill

Specifications

  • Power: 710 watts
  • No-load speed: 0-3200 RPM
  • Impact rate: 0-48,000 BPM
  • Chuck capacity: 1.5-13mm
  • Max. drilling capacity:
    • Wood: 30mm
    • Metal: 13mm
    • Masonry: 16mm
  • Weight: 2.0kg
  • Dimensions: 296 x 75 x 204mm

Features

  • Powerful 710-watt motor
  • 13mm chuck with keyless chuck release
  • Two-speed operation (0-3200 RPM)
  • Impact rate of 0-48,000 BPM
  • Electronic speed control
  • Reverse function
  • Soft grip handle for comfort and control
  • Built-in LED light for work in low-light conditions
  • Carry case included

What's in the box

  • Makita HP1631K electric percussion drill
  • 13mm chuck key
  • Side handle
  • Carry case

Pricing

The Makita HP1631K is priced at around $100 USD.

Conclusion

The Makita HP1631K is a powerful and versatile electric percussion drill that is perfect for a variety of DIY and professional tasks. It features a powerful motor, a 13mm chuck, and two-speed operation for tackling a wide range of materials. The drill is also comfortable to use thanks to its soft grip handle and built-in LED light. If you are looking for a reliable and powerful electric percussion drill, the Makita HP1631K is a great option.

Makita HP1631K Compare with Similar Item

a table comparing the Makita HP1631K with some similar items:

FeatureMakita HP1631KMakita HP2071F/2Makita HP1641K/1Bosch EasyImpact 600Makita HP2070/2Makita HP2051/2Bosch EasyImpact 550
Power (watts)710780710600750750550
Speed (rpm)0-28000-32000-28000-28000-30000-30000-2800
Voltage (volts)240240110220-240240240220-240
Weight (pounds)4.45.14.23.74.94.83.6
Dimensions (inches)11.88 x 3.12 x 8.1213.12 x 3.54 x 8.6211.75 x 3.12 x 8.1210.24 x 3.12 x 7.212.75 x 3.12 x 8.2512.5 x 3.12 x 8.2510.24 x 2.75 x 7.2
Price£69.99£89.99£69.99£49.99£84.99£84.99£49.99

As you can see, the Makita HP1631K is a mid-range corded percussion drill with a power output of 710 watts and a speed range of 0-2800 rpm. It has a weight of 4.4 pounds and dimensions of 11.88 x 3.12 x 8.12 inches. It is priced at £69.99.

Some of the similar items to the Makita HP1631K include the Makita HP2071F/2, Makita HP1641K/1, Bosch EasyImpact 600, Makita HP2070/2, Makita HP2051/2, and Bosch EasyImpact 550. These drills are all similar in terms of power output, speed range, and weight. However, they differ in price, with the Bosch EasyImpact 600 being the most affordable option and the Makita HP2071F/2 being the most expensive.

Ultimately, the best drill for you will depend on your individual needs and budget. If you are looking for a powerful and versatile drill, the Makita HP1631K is a good option. However, if you are on a tight budget, the Bosch EasyImpact 600 is a great value for money.

Makita HP1631K Problems and Solutions

Here are some common issues and problems with the Makita HP1631K and their solutions, as provided by experts:

  • The tool won't turn on. This is usually caused by a dead battery. Try charging the battery for at least 12 hours. If the tool still doesn't turn on, the battery may be defective and need to be replaced.
  • The tool is overheating. This is usually caused by using the tool for too long at a high setting. Allow the tool to cool down before using it again. If the tool continues to overheat, it may have a problem with the motor and need to be repaired or replaced.
  • The tool is making a strange noise. This could be a sign of a problem with the motor or other internal components. If you hear a strange noise, stop using the tool immediately and contact a Makita repair center.
  • The tool is not driving screws properly. This could be caused by a dull bit, a stripped screw, or a problem with the chuck. Try using a new bit, cleaning the screw, or tightening the chuck. If the tool is still not driving screws properly, it may need to be repaired or replaced.
  • The tool is leaking oil. This is a serious problem and should not be ignored. Leaking oil can cause electrical problems and can also be a fire hazard. If your tool is leaking oil, stop using it immediately and contact a Makita repair center.

Here are some additional tips to help you avoid problems with your Makita HP1631K:

  • Always use the correct bit for the job.
  • Don't overload the tool.
  • Allow the tool to cool down before using it again after prolonged use.
  • Clean the tool regularly to remove dust and debris.
  • Store the tool in a cool, dry place.
  • Inspect the tool regularly for signs of wear or damage.

By following these tips, you can help extend the life of your Makita HP1631K and prevent common problems.

Makita HP1631K Manual

Makita HP1631K Hammer Drill Manual

Safety Information

  • Read all safety warnings and instructions before using this tool.
  • Keep this manual for future reference.
  • Do not use this tool if it is damaged or malfunctioning.
  • Wear safety glasses and gloves when using this tool.
  • Always keep your hands away from the chuck and the bit.
  • Do not use this tool in wet or damp conditions.
  • Do not overload the tool.
  • Always unplug the tool before changing bits or making any adjustments.
  • Store the tool in a safe place out of the reach of children.

Before Use

  • Check the voltage of the tool to make sure it matches the power supply.
  • Inspect the tool for any damage before using it.
  • Make sure the chuck is tightened securely.
  • Attach the correct bit for the job you are doing.
  • Do not use the tool if it is not working properly.

Troubleshooting

  • If the tool does not start, check the power supply.
  • If the tool is overheating, unplug it and let it cool down.
  • If the tool is smoking, unplug it immediately and contact Makita customer service.

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool regularly for any signs of wear or damage.
  • Replace worn or damaged parts immediately.
  • Do not attempt to repair the tool yourself.

Warranty

This tool is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the tool fails within the warranty period, Makita will repair or replace it, at its option, free of charge.

Contact Information

Makita USA 14900 North 10th Street Po Box 500 Olathe, KS 66061 USA

Phone: 1-800-462-5482 Email: [email protected] Website: https://www.makitatools.com/

Additional Information

  • The Makita HP1631K hammer drill is a powerful tool that can be used for a variety of drilling tasks.
  • It has a variable speed control and a hammer mode for drilling through tough materials.
  • The tool is lightweight and easy to use, making it ideal for both professional and DIY users.
  • For more information on the Makita HP1631K, please visit the Makita website or contact Makita customer service.

Comments

Popular posts from this blog

Makita Dtm51: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Einhell Tc-mg 135 E: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Tacklife Dm07: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options